Skip to content

What we offer

Granite, quartz, marble and quartzite, cut to fit your space.

We handle countertop fabrication and installation in the Tri-Cities from one shop in Pasco. We measure with a laser, cut the stone on our own CNC and set it with our own crew.

Grey-veined stone counter with an undermount sink and a black spring faucet in front of a bay window
An undermount sink in a veined top we cut and set.

Pick your stone

Four materials. One shop that cuts them all.

Each one looks different, wears different and asks something different of you. Here is the short version. Each page has the long one.

  • Granite countertops

    Natural stone. No two slabs alike.

    Granite countertops
  • Quartz countertops

    Even color. No sealing. Easy upkeep.

    Quartz countertops
  • Marble countertops

    Soft veining for baths, fireplaces and bakers.

    Marble countertops
  • Quartzite countertops

    The look of marble on harder natural stone.

    Quartzite countertops

What we build

Kitchens, baths, outdoor kitchens, fireplaces.

“We basically do anything,” is how Irving puts it. If it is a hard surface and it has to fit, we can fabricate and install it, for a home or for a business.

  • Kitchens

    Counters, islands, peninsulas and full-height backsplashes.

  • Bathrooms

    Vanity tops cut for the sinks and faucets you picked.

  • Outdoor kitchens

    Grill surrounds, bar tops and fire pit tops in stone that takes the weather.

  • Fireplaces

    Surrounds and hearths cut from the slab.

  • Commercial

    Counters for offices, shops and builders. No job is too big or too small.

  • Remodels and new construction

    One kitchen for a homeowner or a run of houses for a builder. We also install in Walla Walla, Hermiston and Pendleton.

How we work

Measured by laser. Cut by machine. Set by hand.

Four steps, all of them ours. The people who measure your kitchen, cut your stone and set it in place work for the same family shop.

  1. Two lettered Granite Guy vehicles parked in front of the cable bridge, with Free Estimates and the phone number on their sides 01 · Estimate

    We come out and look

    Call or send the form. We come to the house or the job site, see the space, talk through the stone and give you a number. The estimate is free.

  2. Laser templater on a tripod in front of new white cabinets, with the countertop drawing on its tablet 02 · Measure

    A laser measures your space

    A laser templater reads your cabinets and walls and draws the layout on a tablet: every corner, the sink, the cooktop and the joints. No cardboard templates, no guessing.

  3. Park Industries CNC machine positioned over a dark slab with white veining 03 · Cut

    Our CNC cuts the slab

    The drawing goes to our CNC from Park Industries, in our own shop in Pasco. It cuts the stone and the openings to the measurement, on slabs as big as 10 by 6 feet, and our fabricators finish it.

  4. Two Granite Guy installers finishing the seam on a large white veined island 04 · Install

    Our own crew sets it

    The tops ride to you on A-frames in our van, and our installers set, level and join them. An install usually takes about half a day.

Countertop visualizer

See your space with new counters!

Browse granite, quartz, marble and quartzite colors and try them in a room before you choose.

Open the Visualizer

Questions

Choosing a countertop, answered.

Still deciding between stones? Call (509) 619-9324 and talk it through with someone who cuts all four.

Which countertop material is best?

It depends on how you use the room. Quartz is the easiest to live with: no sealing and an even color. Granite and quartzite are natural, take heat and can go outdoors. Marble is the softest and the most particular, and many people think it is the most beautiful.

Do you cut the stone yourselves?

Yes. We fabricate in our own shop in Pasco on a CNC from Park Industries, working from a laser measurement of your space. The people who measure, cut and install your counters all work here.

How long does an install take?

The install itself usually takes about half a day. How soon we can get to it depends on the stone you choose and the schedule, so ask when you call.

Do you work with builders and remodelers?

Yes. We do residential and commercial work, remodels and new construction, and we cut for home builders in the Tri-Cities and Walla Walla.

Can I see a stone in a kitchen before I choose?

Yes. Our visualizer page lets you browse granite, quartz, marble and quartzite colors and see them in a room. Bring the ones you like to the estimate.

Free estimates

Ready to transform your living space?

Contact us now to start your free estimate. Tell us about the room and the stone you have in mind, and we will come out and measure.

  • Measured by laser. Your layout is drawn from the room itself, not from a guess.
  • Cut in our own shop. A CNC from Park Industries, right here in Pasco.
  • Licensed, bonded and insured. Washington GRANIG*885NU. Oregon CCB 221752.

Fields marked with an asterisk are required.

Call Free Estimate